Looms and Cables

CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female t...

Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V an...

2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs DTM4 Female to DTM4 Male. Inc...

Soldering is required for assembly

Equivalent plug and connectors as "B" Loom

Equivalent plug and connectors as "A" Loom

Required to add CAN / Serial communications

5 m long 'A' loom to suit G4 and G4+ ECUs

Use to link two or more CAN Gauges together.

Field Installable CAN Plug - Can be used to wire in to the 6 pin CAN port on Link G4/G4+/G4X ECUs that have a round 6 pin CAN communication port. R...

Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6Pin round CAN connector on the front of the ECU.     Compatibl...

Required to add CAN communication to WireIn ECU's which have CAN accessible via the Header.   Compatible ECU's:G4X/G4+ Atom (CAN1)G4X/G4+ Monsoon (...

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older ...

0.4m long 'B' loom to suit G4 and G4+ ECUs

0.4m long 'A' loom to suit G4 and G4+ ECUs

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X St...

CAN to Serial Tuning Cable

Housing and 26 terminals for D connector.

Housing and 26 terminals for C connector. Also to suit obsolete G4 Atom and Lightning. (Not G4+ Atom)

5 m, to suit obsolete G4 Atom and Lightning only. Does NOT fit G4+ Atom

0.4 m, to suit obsolete G4 Atom and Lightning only. Does NOT fit G4+ Atom